Need help?Do you have a question about the poolstar POOLEX PICO 3 and is the answer not in the manual?
Work must be carried out according to a controlled procedure to minimize risks of flammable gases.
Inform all persons, avoid confined areas, secure work area, pay attention to heat sources.
Check area with a suitable refrigerant detector to ensure no flammable gas.
Have appropriate fire extinguishing equipment available for hot work.
Forbidden to use heat, flame, or spark near flammable refrigerant.
Ensure area is open-air or properly ventilated before working on the system.
Ensure capacitors are discharged, no exposed wiring, and grounding continuity.
Installation must be carried out by a qualified professional person.
Disconnect electricity and use authorized service for repairs.
Essential safety instructions to be strictly complied with during installation and servicing.
Detailed technical data for PICO models, including power, COP, dimensions, and electrical specs.
Rules for choosing the heat pump location, including distance from pool and ventilation.
Step-by-step guide to activate heating mode and set the desired temperature.
Table of error codes, faults, possible causes, and recommended actions.
General| Maximum Pool Volume | 15 m³ |
|---|---|
| Refrigerant | R32 |
| Operating Temperature Range | -5°C to 43°C |
| Power Supply | 230V / 50Hz |
| Heating Capacity | 3.5 kW |
| COP (Coefficient of Performance) | 5.0 |
To Next Page