Need help?Do you have a question about the poolstar Poolex Silverline FI 70 and is the answer not in the manual?
The work must be carried out according to a controlled procedure, in order to minimize the risk of presence of flammable gases or vapors.
All persons in the area must be informed of the nature of the work in progress. Avoid working in a confined area.
The area should be checked with a suitable refrigerant detector before and during work.
If hot work is to be performed, appropriate fire extinguishing equipment must be available.
It is totally forbidden to use a source of heat, flame or spark in the direct vicinity of refrigerant.
Repair and maintenance of electrical components must include initial safety checks.
Essential safety guidelines for using the heat pump.
Steps for connecting the heat pump to the pool's water circuit.
Guidelines for safe and compliant electrical hookup.
Detailed instructions for wiring the heat pump.
Identifying and understanding error codes and fault indicators.
Common faults, their causes, and recommended actions.
Detailed breakdown of error codes and their resolutions.
To Next Page
General