EasyManua.ls Logo

Pope Meteor 101PM140 - Mower Operation; Starting the Engine; Stopping the Engine; Mowing Best Practices

Pope Meteor 101PM140
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operation
Starting the Engine
Move the throttle control lever forward to start
position.
Engage the safety stop lever by pushing towards
handlebar.
Grasp the rewind starter handle and pull start the
engine.
Once the engine is running pull the throttle lever
back to the fast position.
Stopping the Engine
To stop the engine
Move the throttle control lever to the SLOW
position.
Release the safety stop lever to brake and stop the
engine. This will also occur if lever is released in
emergency conditions.
Remove the spark plug cover after stopping the
engine to avoid accidental starting.
Important: When you release the Safety stop lever,
both the engine and blade should stop within 3
seconds. If they do not stop properly, stop using your
mower immediately and contact your Authorised
Service Dealer.
Mowing
Warning: The grass catcher must be installed when
mowing.
For best results, adjust the lawnmower cutting
height so that the lawnmower cuts off only the top
1/3 of the grass blades. If the lawn is overgrown it
will be necessary to raise the height of the cut to
reduce pushing effort and to keep from overloading
the engine.
•Press down the push handle and lift the front
wheels to make a turn with your Pope mower. Be
careful of the rotating blades.
9
Caution
Caution
START
FAST
SLOW

Related product manuals