2 . Unable to connect to the network after saving numbers
Solution 1 :
Verify if there's a signal after inserting the SIM card and that the watch can
receive calls.
Solution 2:
Ensure the watch is powered ON before using the app to make calls.
Solution 3 :
Ensure the SIM card has an active data plan and can make calls.
Solution 4 :
Verify the watch ID matches the ID on the tags.
4 . Troubleshooting location functionality
Solution 1 :
Try repositioning to outdoor for a better signal.
Solution 2:
The watch enters 'Sleep Mode', which halts data accessibility to save the
battery. Reactivate the watch by shaking the watch.
3 . You receive ‘The dialed number is busy, try calling again
later’ when calling the watch
Solution 1 :
Check and confirm there's a signal after SIM card insertion.
Solution 2:
Check if the phone numbers are correctly saved in the app.
Solution 3 :
Disable the 'Do Not Disturb' mode in the app if active.
8
To Next Page