l~
Engine/Cooling
9. Loosen
two
straps on coolant feed hose
and
two
clamps.
10. Disconnect vent hose,
tilting
radiator
back slightly
for
this purpose.
11.
Remove radiator
from
below.
Installing
1.
Check
that
radiator
fits
properly
in rubber
mounts.
Place radiator on
bottom
rubber mounts
first
and then press in forward
direction,
making sure
that
rubber
seal
between
top
of
radiator and lock carrier
is
not
damaged.
2. Install clamps and straps.
3. Pour in coolant and bleed cooling system
(see
page
19-
1
).
19-
8
Removing and Installing Radiator
944
Printed
in
Germany
To Next Page
Loading...
