144 Multi-Purpose Display and Instruments
Setting door opening signal
If the function TURN SIGNALS is active, door
unlocking and locking is confirmed by the
emergency flashers flashing.
If the function HORN is active, door unlocking and
locking is confirmed by an acoustic signal.
Setting rear lid locking
When the TAILGATE function is active, rear access
(rear lid, rear window and spare wheel bracket) is
included in the central locking system.
Access is possible when the vehicle is stationary
and unlocked.
At speeds higher than 4 mph (6 km/h), release is
blocked until a door is opened with the vehicle
stationary.
When the TAILGATE function is deactivated,
access is only possible using button on the
remote control.
Note on operation
Vehicles with powerliftgate:
Regardless of the setting in the multi-purpose
display, the rear lid can be opened by pulling the
button in the driver’s door when the vehicle is at a
standstill with the ignition switched on.
Please see the chapter “POWERLIFTGATE (REAR
LID)” on Page 24.
Setting AUTO LOCK (automatic door
locking) and AUTO UNLOCK (automatic
door unlocking)
AUTO LOCK and AUTO UNLOCK variants
You can set 4 different variants of automatic door
locking (AUTO LOCK) and automatic door
unlocking (AUTO UNLOCK).
Doors locked using AUTO LOCK can always be
opened by pulling the inner door handle twice
regardless of the setting for door unlocking.
Option 1:
AUTO LOCK off and AUTO UNLOCK off
The doors do not lock and unlock automatically.
Option 2:
AUTO LOCK on and AUTO UNLOCK off
Doors lock automatically when a speed of approx.
4 mph (6 km/h) is exceeded.
1. MAIN MENU
>SETTINGS
> COMFORT
> DOOR OPENING
> SIGNAL
Select and confirm.
2. Select TURN SIGNALS or HORN.
3. Confirm selection.
Selection is activated.
Selection is deactivated.
1. MAIN MENU
>SETTINGS
> COMFORT
> DOOR OPENING
Select and confirm.
2. Select TAILGATE.
3. Confirm selection.
Function is activated.
Function is deactivated.
1. MAIN MENU
>SETTINGS
> COMFORT
> DOOR OPENING
Select and confirm.
2. Select AUTO LOCK or AUTO UNLOCK.
3. Confirm selection.
Selection is activated.
Selection is deactivated.
To Next Page
Loading...
Need help?
General
