208 Luggage Compartment, Loadspace and Storage
7. Insert headrest into the receiver in the seat
cushion.
Positioning rear seats
1. Remove the headrests from the seat cushion.
2. Make sure that the safety belts are not
trapped.
Raise the backrest until it locks with an audible
click.
The red “verification flag” A must be lowered
completely.
Warning!
Danger of injury and/or damage as a result
of braking or in the event of an accident.
f Do not place any objects between the seat
cushion and foam part.
3. Fold seat cushion back and press down at the
rear.
Make sure that the buckles are accessible.
4. Insert the headrests into the backrest.
Please see the chapter “INSTALLING HEA-
DRESTS” on Page 36.
To Next Page
Loading...
Need help?
General
