Porsche PCM3 - Tracing a Route

NAVI 143
1. When off-road navigation is switched on, press
the f button.
2. Press the i button or touch the tab of
the same name in the header.
3. Select "
Off-road settings".
4. Select "
Recording mode".
5. Set the desired grid by selecting it.
 When off-road navigation is switched on, this
function is also available in the i
menu of the map display after selecting
„
Record trace“.
Tracing a route
You have various options when tracing routes,
based on the trace direction ("
Trace forwards" and
"
Trace backwards") and trace point ("From start
point" and "From current position"):
– From start point, trace forwards:
You are directed to the start point of the
recording and drive the trace from the start
point to the end point.
– From start point, trace backwards:
You are directed to the end point of the
recording and drive the trace from the end
point to the start point.
– From current position, trace forwards:
You are directed to the closest point in the
trace and drive the trace in the direction of the
end point.
– From current position, trace backwards:
You are directed to the closest point in the
trace and drive the trace in the direction of the
start point.
After starting navigation, you are navigated to the
next navigation point. Route guidance is by means
of a compass display with the vehicle symbol in
the center of the compass rose.
The orange-colored direction arrow points in the
direction of navigation point currently being
navigated to. The angular deviation between the
current direction of travel and the direction to the
next navigation point is shown as an orange-
colored segment. The angular deviation is
indicated in degrees.
1. Press the f button.
2. Select "
Stored destinations".
The personal destination memory is opened.
3. Select the desired trace in the list.
4. Select "
Start route guidance".
If off-road navigation is not yet activated, the
safety notice is displayed.
5. Confirm the safety notice with "
Activate „off-
road“" if applicable to activate off-road
navigation.
6. Select the desired direction of travel and start
point along the route to be driven.
Route guidance is started.