Porsche PCM3 - Creating and Sending a New Text Message

76 PHONE
Creating and sending a new text message
You have the following options for creating a text
message:
–"
New text": The input menu is opened and new
text can be entered.
–"
Last text": The input menu is opened and the
text of the last message is shown in the text
field. You can edit or add to this text as
required.
–"
Templates": A list of the message templates is
opened and a template can be accepted by
selecting it or edited.
Creating a text message with new text
1. Press the c button.
2. Select "
Messages".
3. Select the first list entry, "
New message", in the
list that appears.
4. Select "
New text". The input menu is opened.
5. Enter the desired text using the input menu.
6. Confirm your entry by selecting "
OK".
The text input menu is closed and the input
menu for the telephone number is opened.
7. Enter the telephone number of the recipient.
The following options are available to you for
this:
– Enter the digits in the input menu.
–Select "
Phonebook" to insert the number
from the phonebook.
Select the desired number to enter it in the
input menu.
8. Select "
Send" to send the message.
Editing and sending the text of the last
message
1. Press the c button.
2. Select "
Messages".
3. Select the first list entry, "
New message", in the
list that appears.
4. Select "
Last text".
5. Edit the text displayed using the input menu
and add to it if applicable.
6. Confirm your entry by selecting "
OK".
The text input menu is closed and the input
menu for the telephone number is opened.
7. Enter the telephone number of the recipient.
The following options are available to you for
this:
– Enter the digits in the input menu.
–Select "
Phonebook" to insert the number
from the phonebook.
Select the desired number to enter it in the
input menu.
8. Select "
Send" to send the message.
Creating a text message using a text
template
1. Press the c button.
2. Select "
Messages".
3. Select the first list entry, "
New message", in the
list that appears.
4. Select "
Templates".
5. Select the desired template in the displayed
list.