To Next PageTo Next Page
Need help?Do you have a question about the Port A Cool PAC2K24HP220-60 and is the answer not in the manual?
General| Model | PAC2K24HP220-60 |
|---|---|
| Cooling Capacity | 2, 000 CFM |
| Power Supply | 220-240V |
| Phase | Single |
| Airflow | 2, 000 CFM |
| Frequency | 60 Hz |
| Voltage | 220V |
| Air Flow (High) | 2, 000 CFM |
| Dimensions (H x W x D) | 780 x 480 x 380 mm |
| Net Weight | 117 lbs |
Crucial safety guidelines to prevent hazards during unit operation and maintenance.
Step-by-step instructions for safely removing the unit from its packaging.
Guidance on properly connecting the unit to water supply and electrical power.
Details on the unit's technical specifications and performance capabilities.
Recommendations for optimal placement to ensure efficient airflow and cooling performance.
Steps for starting the pump and regulating water distribution to cooling pads.
Instructions for safely starting and operating the fan for cooling.
Routine cleaning and operational checks for daily upkeep of the unit.
Procedures for draining, cleaning, and inspecting the unit on a weekly basis.
Procedures for preparing and storing the unit during off-season.
Contact information and assistance for technical issues.
Information on the warranty coverage, duration, and terms for the unit.
Process for returning parts or units for warranty repair or replacement.
Instructions for replacing the fan motor in various models.
Step-by-step guide for replacing the pump assembly.
Electrical schematic for units with two-speed fan motors.
Electrical schematic for units with variable speed fan control.
Electrical schematic for units with single-speed fan motors.
Electrical schematic for units with three-speed fan motors.
Critical safety warnings regarding intended use and user limitations.
Identification of key components and features of the Cyclone 3000 model.
Identification of key components and features of the Cyclone 2000 model.
Identification of key components and features of the Jetstream models.
Visual identification of main parts for Port-A-Cool units.
Methods for diagnosing and identifying problems within the unit's systems.
Step-by-step instructions for performing repairs and replacing components.
Common fan problems, checks, and solutions for belt and direct drive models.
Common problems with the spray bar, their checks, and solutions.
Common pump issues, checks, and solutions for various pump types.
Common problems with water flow and inlet systems, with checks and solutions.
Common problems with plumbing, checks, and solutions for leaks.
Answers to common questions about unit assembly and initial use.
Explanations for odors and factors affecting air quality.
Troubleshooting steps for units not producing cool air.
Advice on optimal environment, cooling differences, and motor oiling.
Information on purchasing parts and getting technical support.
Location of model and serial numbers for contacting support.
