Versare Portable Products 3236 California Street NE Minneapolis, MN 55418
Phone: 800-830-0210 Fax: 800-310-4874 WWW.portablepartitions.com
VP6 Assembly Instructions
Step #6: Install screws, and repeat for opposite
side.
Step #8: Install screw as shown, repeat
for opposite side..
Step #9: Install 4 casters to the bottom of the
caster base as shown, tighten with wench.
Step #10: Drape over partition panel,
tension and hold in place with
Velcro.
Step #7: Add tube with plastic ends to the two
standing tubes as shown.
Step #11: Install support struts as
shown above, repeat for opposite side.
To Previous Page
