Portable Partitions MP10 User Manual

Versare Solutions 3306 5th Street NE Minneapolis, MN 55418
Phone: 800-833-7570 Fax: 800-833-8032 www.PortablePartitions.com
MP10 Instructions
Recommended tools Step 1: Place box on side and open
Step 2: Rotate box so open end is down
Step 3: Pull box off partition
Step 4: Install casters. Tap in until fully seated*
Step 5: Install 8 casters as shown
Page 1 of 3
* Casters can be installed on either end, the Portable Partitions logo is the top

Portable Partitions MP10 Specifications

General

Product Type	Portable Partition
Style	Modern
Panel Width	24 inches
Panel Height	72 inches
Number of Panels	10
Frame Material	Aluminum
Panel Material	Fabric
Color	Gray
Usage	Indoor

Summary

MP10 Partition Unboxing and Preparation

Recommended Tools for Setup

Lists the essential tools required for the MP10 partition installation process.

Initial Partition Unboxing Steps

Detailed instructions for safely removing the partition from its shipping box.

MP10 Partition Assembly

Caster Installation Guide

Step-by-step instructions for attaching the eight casters to the partition.

Joining Partition Panels

Procedure for connecting the individual partition sections together.

MP10 Partition Deployment

Positioning and Securing the Unit

Guidance on holding and rotating the partition into its final deployed position.

Removing Securing Bands

Instructions for cutting the top and bottom bands securing the deployed partition.