Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the spaces
below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. ______________________________________
IMPORTANT!
Please make certain that the person who is to use
this equipment carefully reads and understands
these instructions before starting operations.
®
ESPAÑOL: PÁGINA 15
FRANÇAIS : PAGE 29
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2005 Porter-Cable
Part No. A14108 - 09-16-05 - Rev. A
OCSILLATING
SPINDLE SANDER
MODEL 121
Note: Rockler may not carry all products and/or sizes listed in this vendor's publication
(23977)
RTD10000214AA
To Next Page
Need help?
General
