To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable SPEED-BLOC 330 and is the answer not in the manual?
General| Type | Finishing Sander |
|---|---|
| Model | 330 |
| Pad Size | 1/4 Sheet |
| Amperage | 1.2 Amps |
| OPM | 12, 000 |
| Power Source | Corded Electric |
Details warnings related to chemicals in dust from sanding and construction.
Ensures a safe environment by maintaining a clean, well-lit area and keeping bystanders away.
Covers proper plug matching, avoiding grounded surfaces, and cord care to prevent shock.
Emphasizes staying alert, using safety equipment, and avoiding accidental starting.
Guidelines on not forcing the tool, maintaining it, and disconnecting power before adjustments.
Instructs users to have the power tool serviced by qualified personnel using identical parts.
Warns about dust hazards from sanding and recommends protective measures and ventilation.
Covers proper tool handling, disconnecting power, and using safety glasses and masks.
Specifies the type of approved respirator mask required for paint removal operations.
Instructions on removing and cleaning protective clothing and shoes to avoid spreading dust.
Details methods for cleaning paint dust using wet mopping and specific detergents.
Guidance on choosing abrasive grit sizes for optimal sanding results.
States the tool is shipped fully assembled, with no assembly required.
Instructions on how to cut and attach Stikit™ abrasive sheets to the sander pad.
Step-by-step guide for attaching standard abrasive sheets using the provided wrench.
Procedure for safely turning the sander on and off, including pre-checks.
Details the proper technique for one-hand sanding, emphasizing letting the tool do the work.
Instructions for cleaning the tool using compressed air and a damp cloth, avoiding solvents.
Steps to check when the tool fails to start, including plug contact and circuit breakers.
States the tool is pre-lubricated for life and requires no further lubrication.
Recommends authorized service centers for brush inspection and replacement for safety.
