Porter-Cable 725 - User Manual

Two-Speed
PORTA-BAND
®
Band Saw
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No._______________________________________
IMPORTANT
Please make certain that the person who
is to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. 902451 - 04-29-02
MODEL 725
ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 27
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2002 Porter-Cable Corporation

Summary

Safety Instructions

Grounding Instructions

Details on proper grounding to prevent electric shock using 3-prong plugs and receptacles.

Extension Cord Usage

Guidelines for selecting and using appropriate extension cords for safety and tool performance.

General Safety Rules

Electrical Safety Precautions

Guidelines on grounding, avoiding wet conditions, and cord care to prevent electric shock.

Personal Safety

Maintaining alertness, proper attire, and avoiding distractions while operating power tools.

Tools Use and Care

Specific Safety Rules and Symbols

Operating Safety Precautions

Specific rules for handling the tool, keeping hands clear, and avoiding hazards during cutting.

Operation and Blade Selection

Starting, Stopping, and Speed Control

Blade Specifications and Choice

Lubricants and Blade Change

Saw Blade Replacement Procedure

Portable Band Saw Operation

Cutting Techniques and Workpiece Handling

Maintenance and Lubrication

Gear Chamber Lubrication Check

Service, Repairs, and Accessories

Authorized Service and Brush Maintenance

Porter-Cable 725 Specifications

General

Weight	11.5 lbs
Type	Circular Saw
Motor	15.0 amp
Blade Diameter	7-1/4 inches
Arbor Size	5/8 inches
Max Cutting Depth at 90°	2-7/16 inches