Porter-Cable 7536 User Manual

Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
ESPAÑOL: PÁGINA 15
FRANÇAISE : PAGE 29
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2003 Porter-Cable Corporation
Part No. 900314 - 12-05-03
MODEL 7536
Consisting of:
MODEL 75361 Base
MODEL 75362 Motor
Double Insulated
Routers
MODEL 7537
Consisting of:
MODEL 75371 Base
MODEL 75372 Motor

Porter-Cable 7536 Specifications

General

Brand	Porter-Cable
Model	7536
Category	Wood Router
Language	English

Summary

Double Insulated Router Overview

Safety Guidelines and Symbol Definitions

General Safety Rules

Essential safety precautions for operating power tools safely.

Electrical Safety

Precautions related to electrical hazards and tool usage.

Personal Safety Precautions

Safety Practices

Tool Usage and Care

Service and Repair Information

Specific Rules and Symbols

Safe Operation Procedures

Key procedures for safe handling, bit installation, and operation.

Assembly

Selecting the Bit

Guidance on choosing and inserting router bits into the collet.

Installing and Removing the Bit

Step-by-step instructions for bit installation and removal.

Motor Base Assembly

With Two Handles Base

Steps to assemble motor into the base with two handles.

With Switch-in-Handle Base

Steps to assemble motor into the base with switch-in-handle.

Adjusting the Depth of Cut

Depth Adjustment Procedure

Router Operation

Connecting to Power Source

Starting and Stopping the Motor

Motor Control Methods

Using the Tool Safely

Safe Tool Operation Practices

Tool Maintenance

Troubleshooting: Failure to Start

Lubrication and Brush Maintenance

Service and Repairs

Information on authorized service centers and warranty repairs.