To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 75361 and is the answer not in the manual?
General| Type | Random Orbit Sander |
|---|---|
| Diameter | 6 inches |
| Amperage | 4.5 Amps |
| Pad Size | 6 inches |
| Dust Collection | Yes |
| Variable Speed | No |
| Model | 75361 |
| Orbits Per Minute | 12000 OPM |
Explains hazard alert symbols like DANGER, WARNING, and CAUTION.
Covers work area, electrical, and general operational safety.
Emphasizes operator alertness, attire, and safety equipment usage.
Covers preventing accidental starts, stability, and proper tool use.
Outlines requirements for qualified personnel and replacement parts.
Details specific rules for router operation and symbols.
Defines electrical symbols used in the manual.
Information on motor compatibility and choosing the right extension cord.
Table providing wire gauge recommendations for extension cords.
Guidance on choosing and installing router bits.
Step-by-step guide for attaching the motor to a two-handle base.
Step-by-step guide for attaching motor to switch-in-handle base.
Detailed steps for setting the cutting depth accurately.
Explains starting and stopping the motor using different base configurations.
Advises on planning cuts and ensuring the workpiece is secured.
Guides on router movement direction based on workpiece and templates.
Warns against climb-cutting and details chip removal for clean cuts.
Information on using edge guides and templet guides for routing.
Instructions for cleaning air passages, plastic parts, and lubrication.
Covers failure to start, brush inspection, and professional repair requirements.
Lists available accessories like collets, sub-bases, and wrenches.
Details the Templet Guide Kit and its components.
Lists service center addresses and contact information across the US.
Lists service center addresses and contact information in Canada.
