To Next PageTo Next Page
Need help?Do you have a question about the Porter-Cable 7529 and is the answer not in the manual?
General| Type | Router |
|---|---|
| Motor Power | 3-1/4 HP |
| Amperage | 15 Amps |
| Voltage | 120 V |
| Spindle Thread | 5/8"-11 |
| Base Type | Fixed Base |
| Collet Size | 1/2 in |
Keep work area clean and lit, avoid explosive atmospheres, and keep bystanders away for safe operation.
Guidelines for safe use of electrical tools, including grounding, cords, and protection from wet conditions.
Stay alert, dress properly, avoid distractions, and maintain balance for safe and controlled operation.
Includes avoiding accidental starts, proper tool handling, and using appropriate safety equipment.
Rules for holding the tool, disconnecting power, securing bits, and workpiece handling during use.
Guidelines on cutting pressure, stopping the motor, bit handling, bit size limits, and avoiding climb-cutting.
Guide on choosing appropriate bits and the procedure for installing and removing them safely.
Instructions for setting and adjusting the plunge depth using depth rods and stops for precise cuts.
Details on using the micro plunge adjustment for fine-tuning depth in handheld or table-mounted use.
