Porter-Cable RN175 User Manual

ROOFING COIL
NAILER
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who is
to use this equipment carefully reads and
understands these instructions before
starting operations.
Part No. 904461 - 09-04-02
ESPAÑOL: PÁGINA 13
FRANÇAISE : PAGE 25
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
MODEL RN175
Copyright © 2002 Porter-Cable Corporation
904461 - 09-04-02.qxd 9/23/02 8:20 AM Page 1

Porter-Cable RN175 Specifications

General

Brand	Porter-Cable
Model	RN175
Category	Power Tool
Language	English

Summary

General Safety Rules

Safe Operation Practices

Covers manual reading, finger placement, pointing tool, hazardous gases, and personal protective equipment.

Air Supply and Hose Requirements

Details safe air pressure, hose ratings, couplings, and connection procedures for tool operation.

Handling and Operation Safety

Includes ear protection, avoiding horseplay, hard hats, and proper trigger/safety discipline.

Work Area Safety and Positioning

Covers footing, tool grip, work surface, fastener angles, and workpiece edges to prevent injury.

Employer's Responsibilities

Power Source

Preparing the Tool

Connecting Air Supply

Connect the tool to the air supply after reading and understanding the manual.

Operating Instructions

Single Sequential Actuation Mode

Contact Actuation Mode

Depth of Drive Adjustment

Clearing a Jammed Fastener

Maintenance

Clean and Inspect Daily

Troubleshooting

Frequent Jamming