Do you have a question about the Portfolio 00742 and is the answer not in the manual?
Brand | Portfolio |
---|---|
Model | 00742 |
Category | Power Pack |
Language | English |
Determine maximum fixtures by adding individual wattages. Total must not exceed 150W per output.
Choose a GFCI outlet location, mark holes using template, drill, and install anchors/screws for mounting.
Split and strip low-voltage cable end, twisting wires to prevent fraying for connection.
Loosen terminal screws, insert wires, and tighten securely to connect low-voltage cable to power pack.
Lay low-voltage cable and distribute light fixtures evenly, ensuring first fixture is min. 10 ft. away.
Plug in power pack, connect fixtures, test system, then cover or bury cable up to 6 inches deep.
Hang the power pack onto the previously installed M5 x 35 mm screws using the keyhole slots.
Mount fiber optic cable holder, insert cable into photo eye socket, and test photo eye functionality.