Need help?Do you have a question about the Portwell ROBO-8777VG2A and is the answer not in the manual?
Defines the positions and functions of jumpers on the ROBO-8777VG2A.
Instructions for installing the Intel LGA775 CPU on the motherboard.
Details on installing and configuring DDR2 SDRAM modules.
Step-by-step guide for installing the ROBO-8777VG2A into a chassis.
Explanation of the Watch Dog Timer (WDT) function and its programming.
Guide on programming the GPIO pins.
Instructions on how to enter the BIOS setup utility.
Details on configuring standard CMOS settings like date, time, and drives.
Configuration for system boot-up, CPU features, and security.
Settings for onboard peripherals like IDE, FDC, Serial, Parallel, and USB.
Tips for quick hardware installation, focusing on backplane and power connectors.
General| CPU Socket | LGA 1151 |
|---|---|
| Max Memory | 32GB |
| Operating Temperature | 0°C to 60°C |
| Memory Speed | 2133MHz |
| Expansion Slots | 1 x PCIe x16 |
| Storage Interface | SATA III, M.2 |
| USB Ports | 4 x USB 3.0, 4 x USB 2.0 |
| Ethernet | 2 x Gigabit Ethernet |
| Audio | HD Audio |
| Display Output | VGA, DVI-D, HDMI |
| Power Supply | ATX |
To Next Page
