POSBank A10 User Manual

POSBank A10 Specifications

General

Print Speed	250 mm/s
Interface	USB, Serial, Ethernet
Paper Roll Diameter	83 mm
Paper Width	79.5 ±0.5 mm
Auto Cutter	Guillotine type (Full or Partial Cut)

Summary

Chapter 1. Introduction

1-1. Warranty

Details the warranty period and terms for the POS terminal product, covering repair or replacement services.

1-3. Safety Information

Provides crucial safety precautions for operation, including electrical safety, environmental conditions, and component handling.

1-4. Liability Limitation

1-5. Installation Recommendations

Offers guidelines for the safe and optimal installation of the printer, covering location and electrical connections.

Chapter 3. Product Settings

3-1. Specifications

Details the comprehensive technical specifications of the A10 thermal receipt printer.

3-2. Printer Setup

Explains the procedures for setting up the printer, including firmware updates and driver installation.

3-3. DIP Switch Settings

Chapter 4. Maintenance

Motherboard Replacement

Printer Mechanism Replacement

Chapter 5. Printer Operation

5-1. Printer Self-test

Explains the procedure for initiating a printer self-test to check its operational status.

5-2. Paper Jam Correction

Provides detailed steps and methods for resolving paper jams within the printer.

5-3. A10 Printer Specifications

Lists the detailed technical specifications for the A10 thermal receipt printer model.