Need help?Do you have a question about the POSBank IMPREX D5 and is the answer not in the manual?
General| Storage | 64GB SSD |
|---|---|
| Memory Upgrade | Up to 8GB |
| Display Type | TFT LCD |
| Resolution | 1024 x 768 |
| Display | 15 inch |
| Processor | Intel Celeron J1900 |
| RAM | 4GB |
| Operating System | Windows 10 IoT |
| Connectivity | Ethernet, USB, Serial |
| I/O Ports | 2 x Serial, 1 x LAN |
| Operating System Alternatives | Linux |
| Display Size | 15 inch |
| Processor (Alternative) | Intel Celeron J1900 |
| RAM (Alternative) | 4GB |
| Operating System (Alternative) | Linux |
| Connectivity (Alternative) | Ethernet, USB, Serial |
| Ports | 2 x Serial, 1 x LAN |
| Dimensions (Alternative) | 375 x 320 x 190 mm |
| Weight (Alternative) | 9 kg |
| Battery | No battery, mains powered |
Details the revision history of the IMPREX D5 User's manual.
Specifies the target audience for the user's guide.
Outlines the arrangement of chapters in the product user's manual.
Explains various compliance marks (CE, FCC, KC, CCC) and disposal guidelines.
Details the product warranty period, coverage, and conditions for repair and replacement.
Provides essential safety instructions for operating and handling the POS system to prevent hazards.
Highlights notices regarding power voltage, sunlight, static electricity, and battery disposal.
Covers liability for service, frequency interference, electronic noise, and product usage limits.
Provides recommendations for safe and optimal installation, avoiding environmental hazards.
Lists items included in the POS terminal package and where to download manuals.
Instructions for removing protective film and attaching optional parts before setup.
States that product parts may differ by model and data sheets are available online.
Identifies components on the front of the POS system through a labeled diagram.
Details the various input/output ports available on the POS system for connectivity.
Provides instructions for installing optional devices like the Customer Display (CDP).
Explains how to connect keyboard and mouse using PS/2 or USB ports on the bottom panel.
Details the Ethernet port connection and LAN LED indicators for network connectivity.
Instructions for connecting the POS system to the power adapter and supply.
Guides on how to turn on the POS system and interpret LED indicator status.
Procedure for properly shutting down the POS system by closing Windows applications.
Explains the buttons and LEDs on the integrated printer's control panel.
Instructions on how to perform a printer self-test to check its status and ROM version.
Guide to entering 'Setting mode' to configure printer properties like baudrate, density, and paper width.
Step-by-step instructions for properly installing a new paper roll into the integrated printer.
Procedure for clearing paper jams from the integrated printer's cutter blades.
Information on installing system drivers, including methods and folder contents for POS terminal drivers.
Provides description of the jumpers and connectors on the motherboard, including safety precautions.
Detailed diagram showing the layout of jumpers and connectors on the motherboard.
Instructions for configuring jumpers, such as clearing RTC RAM, with relevant precautions.
Guide to managing, updating, and configuring system settings through the BIOS Setup Utility.
Details advanced CPU settings like Hyper Threading, SpeedStep, and C-STATES for performance and power management.
Explains how to configure IDE and AHCI settings, including SATA detection and detection timeout.
Monitors system hardware health including temperatures, fan speeds, and voltage levels.
Allows configuration of boot behavior such as Quick Boot, Quiet Boot, and Num-Lock state.
Enables setting supervisor and user passwords for system security and access control.
Provides options to save changes, discard changes, or load optimal defaults before exiting BIOS setup.
Provides corrective procedures for common network access problems, like checking LEDs and cables.
Offers solutions for when the Magnetic Stripe Reader (MSR) does not respond, checking connections.
Troubleshooting steps for non-functional USB ports, including driver reinstallation and device checks.
Addresses issues with LCD backlight, suggesting checks for cable connections and inverter replacement.
Troubleshooting steps for touch-screen not detecting touch operations, focusing on cable and BIOS checks.
Diagnoses abrupt system power-offs or failure to load, checking power connections and adapter.
Provides essential safety guidelines for disconnecting units, handling components, and seeking service.
Step-by-step guide on how to remove the interface panel for motherboard replacement.
Instructions for separating the DC/DC board after removing screws from the motherboard mounting panel.
Details memory configurations and the process of installing SO-DIMM memory modules.
Procedure for replacing the Hard Disk Drive (HDD), including removing covers and screws.
Steps for replacing the Magnetic Stripe Reader (MSR) by removing screws and detaching the cable.
Guide to replacing the display unit, involving raising the unit, removing screws, and disconnecting cables.
Instructions for replacing the printer roller and bracket, involving opening the printer cover and removing screws.
Steps for replacing the printer mechanism and circuit board, involving cover removal and screw detachment.
Procedure for replacing the printer PCB, including removing screws and separating the front cover.
Details the technical specifications of the POS system, including CPU, memory, display, and I/O.
To Next Page
