of 04
Posh Solus Polymarble Shower Base
TBA
Ÿ Install the shower waste as shown.
Do not use “Liquid Nails” or similar rigid construction-
type adhesive to install base.
At this point it is imperative to check that water drains to
the waste outlet prior to lining the shower walls (see
diagram D). Failure to do so is a breach of warranty.
Shower Base Waste
Cleaning
We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage caused by any
improper treatment is not covered by the product warranty - refer to Warranty Conditions.
Care Details
Plumbers, please ensure a copy of the installation
instruction is left with the end user for future reference.
Care Details
Published 26/10/2022 Page 04
Warranty
Ÿ The surface of this base will resist surface build-up. However to preserve it’s high lustre it may be cleaned with a soft
cloth using warm soapy water or mild household detergent.
Do not use any form of abrasive cleaner.
Ÿ If accidental abrasion occurs the surface sheen can be restored by polishing with a silicone based polish.
Storage
Ÿ Posh Solus shower bases are made of solid synthetic polymarble. Shower bases are guaranteed for 7 years against
faulty materials or workmanship, subject to warranty terms and conditions.
Ÿ Warning: Warranty will be void if:
-The installation instructions are not adhered to.
-The base is subject to water at a temperature exceeding 55°C.
Ÿ Shower bases can distort if not stored correctly. If not installed immediately the base must be stored flat, top side up
and not leaning on the waste outlet. Do not place objects on the base during storage. Distortion due to incorrect storage
is not covered by warranty.
To Previous Page
Loading...