Posh Solus User Manual

of 04
Posh Solus Polymarble Shower Base
Posh Domaine MK2 Shower Base
Disclaimer: Products in this specification manual must by regulation be installed by licensed and
registered trade people. The manufacturer/distributor reserves the right to vary specifications or
delete models from their range without prior notification. Dimensions are nominal measurements only.
Dimensions and set-outs listed are correct at time of publication however the manufacturer/distributor
takes no responsibility for printing errors.
Published 27/04/2021
Dimensions are nominal measurements only.
To see the complete Posh range go to
www.reece.com.au
SPECIFICATIONS
Recommended Use Domestic, Hotel & Commercial
Colour Chrome
WARRANTY
Domestic Use Replacement Only 10 Years
Please refer to Warranty Page for full Terms and Conditions
CLEANING RECOMMENDATIONS:
We recommend the use of soapy water or approved cleaners. This product should not be cleaned with abrasive materials. Damage
caused by any improper treatment is not covered by the product warranty. Refer to Posh Warranty page for full Terms and Conditions.
Specification Sheet
Posh Solus MK2 Towel Rack Chrome
9506583
TBA
Cartridge Sleeve x1 Anchor x4 Screw x4
A B C D E F G
H I
Mixer Body x1
Tools Required
Drill
Wrench
Test Plug x1
Cartridge Tile Cover x1
Cartridge Locknut x1
Cartridge Complete x1
Push In Connector x1
Allen Key
TBA
TBA
BACK EDGE PROFILE
Size
900x900
1200x900
A B
900 900
1220 900
A
B
150
35
80
15
10
Diagram
The Posh Solus polymarble shower base is a 4 sided, low profile shower base with a rear outlet. This model is available
in White.
Page 01

Posh Solus Specifications

General

Style	Modern
Material	Vitreous China
Seat	Soft Close
Color	White
Finish Type	Gloss
Trap Type	S-Trap
WELS Rating	4 Star
Litres Per Flush	4.5/3L
Mounting Type	Floor Mounted
Product Type	Toilet

Summary

Product Diagram and Specifications

Diagram and Dimensions

Provides a visual representation of the Posh Solus shower base, including dimensions A and B.

Installation Instructions

Pre-Installation Note

Emphasizes checking wall junctions for a leak-free seal with tiling flange.

Timber Floor Installation

Details preparing timber floors, cutting waste holes, and fixing methods like adhesive or mortar.

Concrete Slab Installation

Covers waste opening limits, fixing methods on concrete, and backfilling procedures.

Smartpan/Smartwaste Installation

Ensures lid/cover provides support and a hole is cut for waste, matching the waste outlet size.

Shower Base Maintenance and Warranty

Shower Base Waste

Instructions for installing the shower waste assembly.

Cleaning Guidelines

Recommends soft cloth, warm soapy water, or mild detergent; advises against abrasive cleaners.

Warranty Conditions

Covers 7-year guarantee, void conditions like non-adherence to instructions or high temperatures.

Storage Recommendations

Details correct flat storage to prevent distortion, avoiding leaning or placing objects on the base.

Care Details and Final Notes

Summarizes cleaning advice and emphasizes leaving instructions with the end user.