G2000/G3000/G6000 Industrial User’s Manual
i
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
This equipment may generate, use and/or radiate radio frequency energy. If not installed and used in full accordance with
this instruction manual, interference to radio communications may occur. This equipment complies with the limits for a
Class A Information Technology Equipment pursuant to Part 15 of the FCC Rules, which are designed to provide reasonable
protection against such interference when operated in a commercial environment. Operation of this equipment in a
residential area may also cause interference. In such case the user will be required, at own expense, to correct the
interference using whatever means necessary.
Trademarks
ARM is a registered trademark of Advanced RISC Machines Ltd.
Centronics is a registered trademark of Centronics Data Computer Corporation.
Microsoft, Windows are registered trademarks of Microsoft Corporation.
POSTEK is a registered trademark of Postek Electronics Co., Ltd.
Copyright
© 2013-2015 by Postek Electronics Co., Ltd. All rights reserved. Under the copyright laws, this manual cannot be
reproduced in any form without the prior written permission of Postek. No patent liability is assumed, with respect to the use
of the information contained herein.
G2000/G3000/G6000 Industrial Label Printer User’s Manual
3rd edition January 2015
Disclaimer
This manual has been validated and reviewed for accuracy. The instructions and descriptions it contains are accurate for the
Postek G Series Industrial label printer at the time of this manual’s distribution. However, succeeding printers and manuals
are subject to change without notice. Postek assumes no liability for damages incurred directly or indirectly from errors,
omissions or discrepancies between the printer and this manual.
Although this manual describes and details many issues which could possibly occur, the manufacturer cannot warrant
against unpredictable conditions during the printing process. For problems such as the printer not working, lost or unclear
print content, etc., the manufacturer and resellers are responsible for correcting these issues (according to Postek Printer
Warranty Clauses). In no event shall the manufacturer or the resellers involved be liable for any damages whatsoever
(including, without limitation, damages for loss of business profits, business interruption, loss of business information, or
other pecuniary loss) arising from the use of, the results of use or inability to use this product, even if the manufacturer has
been advised of the possibility of such damages.
To Next Page
Loading...
