Posturite Wired Penguin User Manual

User & Troubleshooting Guide
Getting Started
Wired Penguin
Plug the USB cable into an empty USB port.
Wireless Penguin
2.4 GHz Micro USB Receiver. The Micro Receiver is located inside the housing on the
underneath of the Penguin (J). Remove the micro receiver and insert into a spare USB port of
your computer or laptop.
Make sure the ON/OFF switch (F) on the base is in the ‘ON’ position.
Rechargeable Battery. The Wireless Penguin has an internal rechargeable battery. There may be
a certain amount of charge already in the battery. To fully charge the battery, insert the USB
end of the cable (G) into a spare USB port of your computer and the DC end of the cable into
the front of your mouse (I) see diagram. Refer to the Charging Light Sequence section to
indicate the battery level.
Plug & Play
The Penguin Mouse uses Plug & Play technology. No additional software is required.
Right or Left Hand Use
The Penguin is set as a Right Handed mouse by default. To change to a Left Handed mouse,
simply depress the raised section of the rocker switch - ‘Bow Tie’ (D) at the front of the
Penguin. This will adjust the way the scroll wheel instructs the on-screen document scroll action
for the Left Handed user.
Variable DPI [400-600-800-1200]
The default setting is 400 DPI. To adjust, press and release the DPI button (E) on the base of the
Penguin. The illuminated ‘P’ logo will flash to indicate the DPI has been changed.
400: The illuminated ‘P’ logo will remain constant (default setting)
600: The illuminated ‘P’ logo will flash (5Hz) for five seconds
800: The illuminated ‘P’ logo will flash (10Hz) faster for five seconds
1200: The illuminated ‘P’ logo will flash (20Hz) fastest for five seconds

Posturite Wired Penguin Specifications

General

Type	Wired
Design	Ergonomic
Connection	USB
Compatibility	Windows, Mac
Device Type	Mouse
Scroll Wheel	Yes
DPI	800
Buttons	Left, Right, Scroll Wheel Click
Hand Orientation	Right-handed

Summary

Getting Started

Wired Penguin Setup

Instructions for connecting the wired Penguin mouse via USB.

Wireless Penguin Setup

Setup for the wireless Penguin mouse, including receiver and battery.

Plug & Play Functionality

Explains the Plug & Play functionality of the Penguin Mouse.

Handed Use Configuration

How to switch the Penguin mouse between right and left-handed use.

Variable DPI Adjustment

Details on adjusting the mouse's DPI settings and indicator lights.

Precision Scroll Wheel Features

Information on the mouse's scroll wheel and its auto scroll functionality.

Wireless Penguin Power Management

Details on the ON/OFF switch, auto power save, and battery indicators.

Wireless Penguin Charging Indicators

Describes the light sequence indicating battery charging status.

Troubleshooting Guide

Wired Penguin Troubleshooting

Steps to resolve connection issues with the wired Penguin mouse.

Wireless Penguin Troubleshooting

Steps to resolve connection and operation issues with the wireless Penguin mouse.