13
http://www.ipotensic.com
Calibration
Push the right stick as picture shown after successful
frequency pairing. Please
loose it when the drone
body light flash quickly ,
indicating that gyro
calibration is completed.
Tips: Crashing the drone may cause the connection to fail,
making the drone hard to control. If this occurs, try
to repair and recalibrate . It must be placed on a
surface！
(This action is operated when flying abnormally)
Unlocking/locking the motor
Unlock the motor:
Lock the motor:
Move the left stick and right stick at the same time 45
degrees inward.
When the motor is working, it could be used to stop the motor
urgently(Move the left stick and right stick at the same time
45 degrees inward).
To Next Page
Loading...
