12
Malfunction Sloving Guideline
Malfunction Cause Treatment
No response on the drone
1. The drone enters low voltage
protection mode
2. The remote controller’s battery
is low and the power indicator
will flash.
3. The frequencies of remote
controller and the drone are
not matched
Response of control is not
sensitive during flight
1. The remote controller’s battery
is low or poor battery quality
2. There are remote controllers
with the same frequency is
transmitting interference.
Deflecting while hovering
1. No horizontal calibration
1. Charge the drone
2. Change the remote controller’s
battery
3. Re-match the frequencies of the
remote controller and the drone.
1. Replace the battery with better
quality
2. Change to a place that does not
have devices with the same
frequency to transmit interference.
1. Do horizontal calibration again
Precautions
1. When the power supply (drone or transmitter) is insufficient, the remote-control distance will be shortened.
2. When the power of the drone is damaged, it will be not easy to take off or fly.
3. When the drone is damaged, please repair and stop using it in time, otherwise it may cause personal injury.
4. If you are not using the transmitter frequently, please remove the battery to avoid battery leakage.
5. Do not drop the transmitter from high or get it severely damaged, otherwise it will shorten the service lift of the transmitter.
There are two remote control modes of this product, mode 1 and mode 2. Mode 1 is the default setting.
To Next Page
Loading...
