Potensic F181WH User Manual

Contents
Important Statement·······················03
Safety Precautions··················· · · · ·0 3
Safe Notice on the Li-Po Battery··············04
Charging Method of Li-Po Battery·············05
Flyer Warnings···························0 5
Definition of the Flyer and the Controller········0 6
Flying Operation··························09
Function of the Flyer··················· ·· · ·1 2
Flip Mode ·······························13
Headless Mode···························13
Installation/Replacement of Motors/Blades······13
Method of Using the Phone APP···············14
Icon Function Introduction ···················15
One-hand Operation ······················· 17
3D Flip ································· ·18
Installation Blades··················· ·····19
Problems Guidance···················· · · ·2 0
02
14
User Manual
Contact E-Mail:support@ipotensic.com

Potensic F181WH Specifications

General

Brand	Potensic
Model	F181WH
Type	Quadcopter
Camera	720P HD
Control Range	100 meters
Frequency	2.4GHz
Battery	3.7V
Functions	Headless Mode, Altitude Hold
Diagonal Length	30 cm
FAA Registration	Not required

Summary

Important Statements and Safety Precautions

General Safety Precautions

Operational Safety

Li-Po Battery Safety Notices

Temperature and Impact Warnings

Do not expose battery to high temperatures, impact, or water.

Battery Handling

Do not detach the battery or leave it unsupervised during charging.

Charging Preparation

Ensure the power supply connection is verified before charging.

Charging and Flyer Operations

Li-Po Battery Charging Method

Details the steps for charging the Li-Po battery via USB and recommended adapter.

Pre-Flight Checks and Procedures

Covers battery charge confirmation, throttle position, and power sequence.

Drone Assembly and Operation Integrity

Battery and Transmitter Setup

Drone Battery Replacement

Step-by-step guide for safely removing and replacing the drone's battery.

Transmitter Battery Installation

Drone Operation and Calibration

Drone Calibration Procedure

Steps to calibrate the drone for stable hovering and control.

Pairing Drone with Transmitter

Instructions for establishing a connection between the drone and transmitter.

Basic Flying Controls

Flight Modes and App Usage

Flip Mode Operation

Headless Mode

Mobile App Installation

Steps to download and install the VS-UFO mobile application.

App-Based Drone Control

Specialized Operation Modes

One-hand Operation Guide

3D Flip Functionality

Maintenance and Troubleshooting

Blade Installation Procedures

Troubleshooting Common Problems

Addresses issues like non-spinning blades, noisy gears, flight deviation, and connection failures.