Pottinger NOVADISC 350

Need help?

Do you have a question about the Pottinger NOVADISC 350 and is the answer not in the manual?

Summary

Operators manual

WARNING SIGNS

Meaning of warning signs

Explains various hazard symbols and safety precautions for operation.

Recommendations for work safety

General safety advice and symbol key for the manual.

HITCHING IMPLEMENT TO TRACTOR

DISMOUNTING IMPLEMENT FROM TRACTOR

WORKING ON SLOPES

Take care when turning on slopes!

Safety advice and precautions for operating on inclines.

STARTING WORK

Important points before starting work

Key checks and advice before operating the machine.

Safety hints

Specific safety checks and procedures before operation.

MOWING

General guidelines for working with the implement

Anti-collision device

Explanation and adjustment of the collision safety feature.

GENERAL MAINTENANCE

Safety advice

Safety precautions before performing maintenance or adjustments.

General maintenance information

General tips for maintaining the implement in good condition.

MAINTENANCE

Oil level check, angular gear

Angular gear oil change

MAINTENANCE AND REPAIRS

Cutter bar oil level check

How to check the oil level in the cutter bar.

Cutter bar oil change

Installing cutter blades

MAINTENANCE AND SERVICE

Changing the Cutter Blades (up to 2003 model)

Changing the Cutter Blades (from 2004 model)

TECHNICAL DATA

The defined use of the mower unit

SUPPLEMENT - A

Recommendations for work safety

General safety recommendations for operating the machine.

Qualified personnel

Lubrication chart

Lubricants

IMPORTANT! ADDITIONAL INFORMATION

Combination of tractor and mounted implement

Determination of the total weight, the axle loads, the tyre load carrying capacity and the necessary minimum ballasting

Calculation procedures for tractor weight, axle loads, and ballasting.