To Next PageTo Next Page
Need help?Do you have a question about the Pottinger TOP 420 N and is the answer not in the manual?
Attaching machines to the tractor's three-point linkage system.
Securing the headstock for transport or during lowering operations.
Procedure for safely lowering the implement after use.
Steps to configure the machine for transport.
Steps to configure the machine for operation.
Basic rules for operating the machine safely and effectively.
Specific considerations and safety measures when operating on inclines.
General procedures for keeping the machine in good condition.
Instructions on how to clean machine components properly.
Maintenance and lubrication of drive shafts.
Proper procedures for storing the machine during winter.
Reference to the lubrication schedule and points.
Specifies the intended agricultural applications for the rotary swather.
Location and importance of the machine's identification plate.
Clarifies the proper and intended use of the machine.
Information regarding the use of original and tested spare parts.
Importance of keeping machine guards and protective devices intact.
Essential checks and awareness before commencing operation.
Information about potential asbestos content in components.
Rules against carrying passengers on the machine.
Factors affecting driving performance with mounted implements.
Broad safety advice covering various operational aspects.
Safe methods for cleaning machine components.
How to determine the correct length for the driveshaft.
Guidelines for safe and correct operation of the driveshaft.
Steps to adjust the driveshaft length.
Specifications for wide-angle joints on the driveshaft.
Specifications for standard joints on the driveshaft.
Routine maintenance for driveshafts.
Function and use of the retaining chain for drive shafts.
Explanation of the safety clutch mechanism on the driveshaft.
Key points regarding driveshafts equipped with a friction clutch.
Considerations for mounting implements onto tractors.
Calculating weight distribution and ballast requirements for safe operation.
Calculating the actual front axle load.
Calculating the actual total weight of the tractor and implement.
Calculating the actual rear axle load.
Ensuring tyre load capacity is not exceeded.
General| Brand | Pottinger |
|---|---|
| Model | TOP 420 N |
| Category | Farm Equipment |
| Language | English |
