To Next PageTo Next Page
Need help?Do you have a question about the Poulan Pro Farmhand 2050 and is the answer not in the manual?
General| Engine Type | 2-stroke |
|---|---|
| Displacement | 50 cc |
| Bar Length | 20 inches |
| Chain Pitch | 0.325 in |
| Chain Gauge | 0.050 inch |
| Type | Gas Chainsaw |
Essential steps to take before operating the chainsaw for safe use.
Guidelines for the correct and safe operation of the chainsaw.
Instructions for keeping the chainsaw in proper working condition.
Precautions and steps for safely handling fuel for the chainsaw.
Explanation of kickback and its causes to prevent serious injury.
Techniques and posture for maintaining control of the chainsaw during use.
Methods and features to minimize the risk of dangerous kickback incidents.
Description of safety features designed to reduce kickback hazards.
Details on the chain brake system and computed kickback angles.
Step-by-step guide for assembling the guide bar and chain to the saw.
Instructions for adjusting chain tension for safe and efficient operation.
Procedures to verify the chain tension is correctly set.
Familiarization with the chainsaw's components and controls for safe use.
Proper procedures for mixing and fueling the chainsaw engine.
Importance and method for lubricating the bar and chain.
Steps for starting a cold or unused chainsaw engine.
Troubleshooting steps for engines that are hard to start or flooded.
Procedures for restarting a recently used chainsaw engine.
How to check and ensure the chain brake functions correctly.
How the inertia-activated chain brake works and its checks.
Key considerations and general advice before and during cutting.
Methods and safety precautions for felling trees.
Specific techniques for felling trees larger than six inches in diameter.
Detailed steps for making the notch cut and felling cut for trees.
Different cutting techniques for bucking fallen trees.
Steps for safely removing limbs from a cut tree.
Techniques for cutting branches, especially those above shoulder height.
Recommended schedule for maintenance tasks and inspections.
Instructions for cleaning and maintaining the air filter.
Procedures for inspecting and cleaning the muffler and spark arresting screen.
Steps for cleaning the spark arresting screen for safety and performance.
Information regarding carburetor adjustments and recommended service.
Guide for maintaining the guide bar to ensure proper cutting performance.
Recommendation for professional chain sharpening due to complexity.
Note that ignition timing is fixed and non-adjustable.
Guidance on replacing the spark plug for optimal engine starting and running.
