To Next Page
A
Adam AllenJul 26, 2025
What to do if my Poulan Pro PP4620AVX Chainsaw engine will not start?
- KKimberly RichardsonJul 26, 2025
If your Poulan Pro Chainsaw engine won't start or runs only briefly, here are a few things to check: * Ensure the ignition switch is in the ON position. * Make sure the fuel tank isn't empty; if it is, fill it with the correct fuel mixture. * A spark plug that is not firing can also cause this issue; install a new spark plug. * Check if fuel is reaching the carburetor. A dirty fuel filter should be replaced and kinked or split fuel lines should be repaired or replaced. * The engine may be flooded. Refer to the “Difficult Starting” section in the Operation Section.
General
