To Next Page
S
Shannon TerrellJul 26, 2025
What to do if my Poulan Pro Saw engine will not start?
- BBrittany ThomasJul 26, 2025
If your Poulan Pro Saw engine won't start, there are several potential causes. First, ensure the ignition switch is set to 'ON'. If the engine is flooded, refer to the 'Difficult Starting' section in the manual. Also, check if the fuel tank is empty and fill it with the correct fuel mixture if needed. A faulty spark plug could also be the culprit, so consider installing a new one. Finally, verify that fuel is reaching the carburetor by checking for a dirty fuel filter (replace if necessary) or a kinked/split fuel line (repair or replace as needed).
General
