Poulan Pro PP3516AVX User Manual

• 1-800-554-6723
www.poulan-pro.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
&
PP3516AVX / PP4218AVX
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENCIA:
Lea etmanual de instrucciones y siga todas Ias advertencias e en-
strucciones de seguridad. Etno hacerlo puede resultar en tesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tous tes avertisse-
ments et toutes tes instructions de s_curit& Tout defaut de le faire
pourrait entra_ner des blessures graves.
Poulan PRO Poulan PRO
t030 Stevens Creek Road 5855 TerryFox Way
Augusta, GA 30907 Mississauga, Ontario L5V 3E4
545186778 Rev. 1 4/15/08 BRW

Poulan Pro PP3516AVX Specifications

General

Engine Type	2-Cycle
Engine Displacement	35 cc
Bar Length	16 inches
Oil Capacity	6.8 oz
Chain Pitch	3/8 inches
Chain Gauge	.050 inches

Summary

Comprehensive Safety Rules and Practices

Planning, Gear, and Safe Operation

Covers pre-operation planning, protective equipment, and safe usage guidelines.

Maintenance and Fuel Handling Safety

Kickback Hazards and Prevention

Kickback Types and Causes

Defines rotational, pinch, and pull-in kickback, explaining their origins.

Kickback Reduction and Control Techniques

Provides methods to minimize kickback risk and maintain operational control.

Kickback Safety Features and Chain Brake

Features for Kickback Mitigation

Describes design elements like guide bars, chains, and guards that reduce kickback.

Chain Brake Operation and Limitations

Explains the function of the chain brake system and its safety considerations.

Technical Specifications and Safety Standards

Kickback Angle Data and Compatibility

Chain Tension Verification and Adjustment

Verifying Chain Tension Status

Fine-Tuning Chain Tension Settings

Chainsaw Controls and Operation Overview

Key Controls and Their Functions

Engine Preparation and Starting Procedures

Fueling and Lubrication Procedures

Covers correct fuel mixture ratios and bar/chain lubrication.

Pre-Start Checks and Starting Methods

Details essential pre-start checks and safe methods for engine ignition.

Engine Starting Scenarios and Safety Checks

Cold, Warm, and Difficult Starting Guides

Step-by-step instructions for various engine starting conditions.

Chain Brake System Verification

Operating Tips and Tree Felling Techniques

General Operating Advice and Best Practices

Tree Felling Planning and Execution

Covers planning, safety, and methods for felling trees.

Cutting Fallen Trees (Bucking) Procedures

Bucking Techniques and Safety Precautions

Details safe methods for cutting fallen logs and important safety points.

Limbing and Pruning Chainsaw Operations

Limbing Techniques and Safety Considerations

Chainsaw Service and Maintenance Schedule

Component Cleaning and Replacement Procedures

Engine Care and Troubleshooting

Troubleshooting Common Engine Problems

A table listing typical engine issues, their causes, and remedies.