To Next PageTo Next Page
Need help?Do you have a question about the Poulan Pro PP3816 AV and is the answer not in the manual?
General| Brand | Poulan Pro |
|---|---|
| Model | PP3816 AV |
| Category | Chainsaw |
| Language | English |
Explains key safety symbols, general warnings, PPE, two-hand operation, and kickback tip contact.
Covers spark plug disconnect, general precautions, planning, user eligibility, required gear, safe environment, and operating conditions.
Details proper handling, location, ladder use, starting, cut completion, damaged equipment, carrying, grip, stance, and cutting height.
Covers service, chain stop, modifications, handle care, fasteners, accessories, fuel safety, and storage.
Explains kickback, its types, and methods to avoid it.
Covers recognizing kickback, avoiding tip contact, clearing area, chain sharpness, cutting speed, log handling, plunge cuts, and using specific parts.
Details grip, hand position, stance, body position, overreaching, and cutting height.
Discusses features designed to reduce kickback.
Describes low-kickback chain, front hand guard, and handlebar design.
Discusses chain brake limitations, kickback reactions, and computed kickback angle.
Covers steps 1-5 and related warnings for attaching the bar and chain.
Details chain direction and initial tensioning steps.
Covers steps 6-11 for attaching the bar and chain.
Covers checking, adjusting, and importance of chain tension, including warnings.
Covers ON/STOP switch, throttle trigger, throttle lockout, choke/fast idle lever, primer bulb, and chain brake.
Warning about the hot muffler and potential chemical hazards.
Covers fuel handling, oil mix, lubrication, fuel system care, and storage advice.
Details starting steps for cold/warm engines, rope pull, important points, warnings, and troubleshooting references.
Details starting steps for cold and warm engines, and troubleshooting advice.
Explains chain brake activation, disengagement, and testing procedures.
Covers chain tension, material type, foreign object contact, dirt avoidance, practice, throttle use, cutting pressure, and stopping.
Includes branch hazards, proximity warnings, planning, clearing, terrain, natural factors, rot, fall clearance, debris, and retreat paths.
Details the notch method, buttress roots, and cutting steps.
Covers wedges, overcutting, undercutting, compression cuts, and warnings about pinching.
Details bucking with and without support, including first and second cuts.
Includes cutting one log, shattered wood, sawhorses, and tangled areas.
Covers kickback, climbing, hand grip, springpoles, springback, clear area, and limb support.
Details limbing timing, direction, positioning, and cutting methods, plus pruning height limits and the three-cut technique.
Covers safety warnings, authorized service, maintenance schedule, general recommendations, and checking for damaged/loose parts.
Details checking chain sharpness and guide bar maintenance.
Covers cleaning the air filter and inspecting/cleaning the muffler and spark arresting screen.
Covers inspecting the unit, decals, chain brake, and fuel mixture level.
Details procedures for replacing spark plug and fuel filter.
Covers chain sharpening recommendation and carburetor adjustment procedures.
Covers general storage steps, seasonal storage, and fuel system storage.
Covers engine storage tips, oiling, and fuel/gas can storage.
Details common problems like starting, idling, acceleration, smoking, and chain movement at idle.
Covers warranty coverage, duration, exclusions, and product improvement.
Details owner's and manufacturer's rights and responsibilities for emissions control.
Covers commencement date, length, exclusions, and claim filing.
Details engine information, air index, and compliance use.
