To Next PageTo Next Page
Need help?Do you have a question about the Poulan Pro PP4218 and is the answer not in the manual?
General| Engine Type | 2-Cycle |
|---|---|
| Engine Displacement | 42cc |
| Bar Length | 18 inches |
| Weight | 10 lbs. |
| Fuel Capacity | 14 oz. |
| Oil Capacity | 6.8 oz. |
| Chain Pitch | 0.325 inches |
| Chain Gauge | 0.050 inches |
Read manual, use protective gear, and understand safety precautions before operating the saw.
Guidelines for safe operation, including two-handed use, ventilation, and avoiding hazards.
Instructions for keeping the saw in optimal condition, including service and part recommendations.
Safety measures for handling fuel, including mixing, storage, and preventing ignition sources.
Details on features like reduced-kickback guide bars and low-kickback chains to minimize kickback hazards.
Step-by-step instructions for installing the guide bar and chain, including initial tensioning.
Procedures for checking and adjusting chain tension to ensure safe and effective operation.
Familiarization with the different parts and controls of the Poulan PRO chain saw.
Guidelines for safely fueling the engine, including oil mix ratios and fuel handling precautions.
Importance of continuous lubrication for the bar and chain, and recommended oil types.
Step-by-step procedure for starting a cold or warm engine, including choke and primer usage.
Procedure for checking the proper functioning of the chain brake system while the engine is running.
Procedure for testing the inertia-activated chain brake function with the engine turned off.
Methods and safety precautions for felling trees, including planning and notch cutting procedures.
Explains different cutting methods for bucking logs, including support and no-support techniques.
Techniques for cutting logs that are not supported, focusing on overcutting and log compression.
Methods for bucking logs when they are supported by a log or stand, emphasizing proper cut order.
Safe practices and techniques for removing branches from a felled tree, starting from the base.
Guidelines for pruning limbs, limiting cuts to shoulder height and using specific cutting sequences.
Recommended maintenance tasks and their frequency for optimal saw performance and longevity.
Inspection procedures to identify and replace any parts that are damaged or show signs of wear.
How to determine if the chain is dull by the type of wood chips produced and the cutting speed.
Identifying conditions requiring guide bar maintenance and procedures for cleaning and maintaining the bar.
Steps for cleaning the air filter to maintain engine performance and reduce emissions.
Procedure for cleaning the spark arresting screen to prevent fire hazards and maintain performance.
Instructions for replacing the fuel filter to ensure proper fuel delivery to the engine.
Reference to the CHAIN TENSION section in ASSEMBLY for proper chain adjustment.
Recommendation to refer chain sharpening to a professional due to its complexity and tool requirements.
Procedure for adjusting the carburetor idle speed to ensure proper engine operation.
Preparing the unit for long-term storage, including cleaning and protective measures.
Information regarding the use of fuel stabilizers and the impact of gasohol on fuel systems.
A guide to identify and resolve common engine problems, their causes, and recommended remedies.
