Poulan Pro PP3816 User Manual

Poulan PRO
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner routil au detaillant.
• 1-800-554-6723
www.poulan-pro.com
Instruction Manual
Manual de Instrucciones
Manuel d'lnstructions
PP3816 / PP4218
For Occasional Use Only
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury.
ADVERTENClA:
Lea el manual de instrucciones y siga todas las advertencias e en-
strucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d'instructions et bien respecter tousles avertisse-
ments et routes les instructions de securite. Tout defaut de le faire
pourrait entra_ner des blessures graves.
Poulan PRO Poulan PRO
1030 Stevens Creek Road 5855 Terry Fox Way
Augusta, GA 30907 Mississauga, Ontario L5V 3E4
545123701 8/25/06

Poulan Pro PP3816 Specifications

General

Engine Type	2-Cycle
Engine Displacement	38 cc
Bar Length	16 in
Chain Pitch	3/8 in
Chain Gauge	.050 in
Oil Capacity	6.8 oz

Summary

Introduction and Initial Safety

Multilingual Safety Warnings

Presents critical safety warnings in English, Spanish, and French.

Safety and Operation Basics

General Safety Rules Overview

Lists fundamental safety precautions for operating the chainsaw.

Safe Operation, Maintenance, and Fuel Handling

Required Protective Gear

Details essential personal protective equipment for safe chainsaw operation.

Safe Operating Practices

Covers guidelines for using the chainsaw safely and effectively.

Understanding Kickback Hazards

Defines kickback and its causes, highlighting potential dangers.

Kickback Prevention and Control

Types of Kickback Explained

Describes different types of kickback, such as Pinch-Kickback and Pull-In.

Techniques to Avoid Kickback

Offers methods and practices to minimize the risk of kickback.

Maintaining Operator Control

Guides on proper grip, stance, and body positioning for control.

Kickback Safety Features and Chain Brake

Key Kickback Safety Features

Details features like guide bars, chains, and hand guards designed to reduce kickback.

Chain Brake Functionality

Explains how the chain brake mechanism works to stop the chain.

Chain Tensioning and Adjustment

Completing Chain Installation

Adjusting Chain Tension

Detailed procedure for setting the correct chain tension.

Checking Chain Tension Correctness

Methods to verify if the chain tension is set properly.

Chain Saw Components and Controls

Chain Tension Reminder

Reinforces the importance of checking chain tension regularly.

Starting Procedures and Brake Checks

Cold Engine Starting Procedure

Step-by-step guide for starting a cold or recently refueled engine.

Warm Engine Starting Procedure

Checking Chain Brake Function

Procedures to test both the manual and inertia activation of the chain brake.

Operating Tips and Tree Felling

Tree Felling Safety and Planning

Notched Cut for Felling Large Trees

Cutting Fallen Trees (Bucking)

Bucking Techniques Explained

Overcutting and Undercutting Methods

Cleaning and Component Checks

Cleaning the Air Filter

Cleaning Muffler and Spark Screen

Replacement, Adjustment, and Storage

Chain Adjustment and Sharpening

Covers setting chain tension and professional chain sharpening.

Carburetor Adjustment Procedures

Troubleshooting and Engine Tips

Engine Troubleshooting Guide

Offers solutions for common engine problems like not starting or poor idling.

Troubleshooting Table Details

A detailed table listing engine troubles, causes, and remedies.