Poulan Pro P2500 User Manual

P2500
WARNING:
Read and follow all Safety Rules and Operating Instructions before
using this product. Failure to do so can result in serious injury .
ADVERTENCIA:
Lea el manual de instrucciones y siga todas las advertencias e
instrucciones de seguridad. El no hacerlo puede resultar en lesiones
graves.
AVERTISSEMENT:
Lire le manuel d’instructions et bien respecter tous les avertisse-
ments et toutes les instructions de sécurité. Tout défaut de le faire
pourrait en traîner des blessures graves.
Instruction Manual
Manual de Instrucciones
Manuel d’Instructions
ENGLISH ESPAÑOL
FRANÇAIS
Poulan
1030 Stevens Creek Road
Augusta, GA 30907
For Occasional Use Only
Poulan
5855 Terry Fox W ay
Mississauga, Ontario L5V 3E4
R
Please do not return unit to retailer.
Por favor, no devuelva el aparato al lugar de compra.
Veuillez ne pas retourner l’outil au détaillant.
1-800-554-6723
www.poulan.com
545154717 Rev. 1 11/01/07 BRW

Poulan Pro P2500 Specifications

General

Displacement	25cc
Power Source	Gasoline
Shaft Type	Straight
Engine Type	2-Cycle
Cutting Width	16 in
Cutting Swath	16 in

Summary

IDENTIFICATION OF SAFETY SYMBOLS

Trimmer Line Hazards and PPE

Details risks from trimmer line and required personal protective equipment.

SAFETY RULES

OPERATOR SAFETY

Personal Protective Equipment (PPE)

Details required clothing, eye, and hearing protection for safe operation.

Situational Awareness and Environment

Emphasizes alertness, common sense, and safe operating locations.

Fuel Safety Procedures

Guidelines for handling gasoline and oil mixtures safely.

UNIT AND MAINTENANCE SAFETY

Maintenance Safety Precautions

Safety steps before performing maintenance, like disconnecting the spark plug.

OPERATION

Engine Starting Procedures

How to use the primer bulb and choke for starting the engine.

STARTING PROCEDURES

Starting Different Engine Conditions

Procedures for starting cold, warm, or flooded engines.

Stopping the Unit

Safe methods for turning off the engine.

OPERATING INSTRUCTIONS

Trimmer Line Advance

Cutting Methods and Techniques

Various cutting styles, proper techniques, and avoiding damage.

MAINTENANCE

Safety Precautions for Maintenance

TROUBLESHOOTING TABLE

LIMITED WARRANTY

Warranty Coverage and Terms

Details on warranty duration, covered purposes, and exclusions.

Warranty Claim Procedures

EMISSION CONTROL WARRANTY STATEMENT

Warranty Rights and Obligations

Explains owner's and manufacturer's responsibilities for emissions warranty.

Emissions Control Parts and Coverage