Poulan Pro PLN3516F User Manual

BEWARE OF:
ROTATIONAL KICKBACK (Figure 2-5A)
A= Kickback path
8 = Kickback reaction zone
2-5A
THE PUSH (PINCH-KICKBACK) AND
PULL REACTIONS (Figure 2-5B)
A = Pull
B = Solid objects
C = Push
2-58
KICKBACK may occur when the NOSE or
TIP of the guide bar touches an object, or
when wood closes in and pinches
the saw chain in the cut.
Tip contact in some cases may cause a
lightening-fast reverse reaction, kicking the
guide bar up and back toward the operator.
PINCHING the saw chain along the
BOTTOM of the guide bar may PULL the
saw forward, away from the operator.
(See Fig. 2-5B “A")
PINCHING the saw chain along the TOP of
the guide bar may PUSH the guide bar
rapidly back toward the operator
(See Fig, 2-5B "C").
Any of these reactions may cause you to
lose control of the saw, which could result
in serious personal injury.
2-6. IDENTIFICATION OF SAFETY SYMBOLS
or even fatal injury.
Read and understand the
instruction manual before using
the chain saw.
WARNING! This chain saw can
be dangerous, careless or
improper use can cause serious
A Double insulated - When
17] servicing use only identical
LEO} replacement parts. Replace
damaged cord immediately.
To reduce shock hazard, do not
expose unit to water or operate
on wet ground.
Contact of the guide bar tip with
any object should be avoided. Tip
contact may cause the guide bar
to move suddenly upward and
i backward, which may cause
serious injury.
hale
Always use both hands when
operating the chain saw.
>
«i AS
There may be other replacement
components for achieving
Kickback protection.
SA
ei
Hearing protection should be
worn.

Poulan Pro PLN3516F Specifications

General

Brand	Poulan Pro
Model	PLN3516F
Category	Chainsaw
Language	English