What to do if floor surfaces appear cloudy after using my Poulan Pro Steam Cleaner?
If your floor surfaces look cloudy or streaky after using the Poulan Pro Steam Cleaner, it could be because the microfiber pad is dirty. Replace it with a clean one. Another reason could be hard water residue on the floor. Try switching to distilled or de-mineralized water.
What to do if accessories do not stay firmly connected to Main Nozzle of my Poulan Pro Steam Cleaner?
If the accessories aren't staying connected to the main nozzle/jet nozzle of your Poulan Pro Steam Cleaner, it's likely that they aren't properly installed. Double-check that the accessories are correctly connected.
Why is there excessive water in the steam from my Poulan Pro PP270 Steam Cleaner?
Excessive water in the steam could be due to a few reasons. It might be caused by water condensation in the steam hose. To resolve this, point the nozzle towards a sink, tub, or the ground and shake it while pressing the steam trigger until the excess water is released. Another cause could be overfilling the reservoir. Filling it with more than 25 oz (739 ml) of water can interfere with steam production. Drain some water out of the reservoir. Always use the included measuring cup to fill the reservoir with the correct amount of water. Also, the unit might not have reached its full operating temperature. Wait until the steam indicator light turns blue before you start steaming.
What to do if my Poulan Pro Steam Cleaner won't heat up?
If your Poulan Pro Steam Cleaner isn't heating up, there are several things to check: * First, make sure the unit is properly plugged into an electrical outlet. * Check your household circuit breaker or ground fault interrupter to see if it has tripped, or if a fuse has blown. Reset the breaker/interrupter or replace the fuse. If you need help with this, contact a licensed electrician. * If the reservoir is empty, this can cause the unit not to heat. * Mineral build-up in the unit can also prevent heating.
Why is the steam output weak on my Poulan Pro Steam Cleaner?
A weak or intermittent steam output from your Poulan Pro Steam Cleaner can be caused by a low water level in the reservoir. Also, mineral build-up in the unit can restrict the steam flow.
General| Brand | Poulan Pro |
|---|---|
| Model | PP270 |
| Category | Steam Cleaner |
| Language | English |
Defines intended household use and warns about supervision for children and impaired persons.
Lists detailed safety directions to reduce risks during operation, including electrical safety.
Identifies all components and features included with the steam cleaner unit.
Guides on connecting extension wands and attaching the mop head to the unit.
Guides on attaching microfiber pads to the mop head and lists compatible floor surfaces.
Instructions for attaching the jet nozzle and utility brushes to the unit's accessories.
Guides on attaching the shoulder strap and provides recommendations for accessory use.
Steps for filling the water reservoir and safety precautions for refilling when unit is in use.
Detailed steps for operating the steam cleaner for general cleaning tasks and killing bacteria.
Instructions for using the steam cleaner to mop floors effectively, including killing microorganisms.
Guidelines for safely storing the steam cleaner and its accessories after use.
Maintenance steps to ensure unit longevity, including mineral build-up removal procedures.
Addresses common issues like heating, steam output, and floor streaking with their respective solutions.
Contact information for support and instructions on how to order parts and accessories.
Explains the terms, coverage, and exclusions of the product's 2-year limited warranty.
Instructions on how to register the warranty and obtain service for the product.
To Next Page
