• Watchforshiftingofwoodorotherforcesthat
couldcloseacutandpinchorfallintochain,
• UsetheReduced-KickbackGuideBarand
Low-KickbackChainspecifiedforyourunit.
MAINTAIN CONTROL
• Keep a good, firm grip on the pruner with
both hands when the engine is running and
don't let go, A firm grip wifl help you reduce
kickback and maintain control. Keep the
fingers of your left hand encircling and your
left thumb under the assist handle, Keep
your right hand completely around the
throttle handle whether your are right
handed or left handed.
• Stand with your weight evenly balanced on
both feet,
• Stand slightly to the left side of the pruner to
keep your body from being in a direct line
with the cutting chain,
KICKBACK SAFETY FEATURES
The following features are h_cluded on your
pruner to help reduce the hazard of kickback;
however, such features will not totally elimi-
nate this danger. As a pruner user, do not rely
only on safety devices. You must follow all
safety precautions, instructions, and mainte-
nance in this manual to help avoid kickback
and other forces which can result in serious
injury,
• Reduced-Kickback Guide Bar, designed
with a small radius tip which reduces the
size of the kickback danger zone on the bar
tip,
Reduced Kickback Symmetrical Guide Bar
_all Radius Tip
SymmetficaJ Guide Bar I_._
Large Radius Tip
• Low-Kickback Chain, designed with a
contoured depth gauge and guard link
which deflect kickback force and allow
wood to gradually ride into the cutter.
Contoured Depth Gauge
Elongated Guard Link
Deflects
_/- | kickback force
Low-Kickback _ and allows wood
Chain to gradually ride
into cutter
_Can Obstruct Material
Not a Low- Kickback Chain
SAFETY NOTICE: Exposure to vibrations
through prolonged use of gasoline powered
hand tools could cause blood vessel or nerve
damage in the fingers, hands, and joints of
people prone to circulation disorders or ab-
normal swellings. Prolonged use in cold
weather has been linked to blood vessel dam-
age in otherwise healthy people. If symptoms
occur such as numbness, pain, loss of
strength, change in skin color or texture, or
loss of feeling in the fingers, hands, or joints,
discontinue the use of this tool and seek med-
ical attention, An anti-vibration system does
not guarantee the avoidance of these prob-
lems. Users who operate power tools on a
continual and regular basis must monitor
closely their physical condition and the condi-
tion of this tool,
SPECIAL NOTICE: This unit is equipped
with a temperature fimiting muffler and spark
arresting screen which meets the require-
ments of California Codes 4442 and 4443. All
U.S. forest land and the states of California,
idaho, Maine, Minnesota, New Jersey, Ore-
gon, and Washington require by law that
many internal combustion engines be
equipped with a spark arresting screen, Ifyou
operate in a Iocale where such regulations ex-
ist, you are legally responsible for maintaining
the operating condition of these parts, Failure
to do so is a violation of the law, For normal
homeowner use, the muffler and spark arrest-
ing screen will not require any service. After
50 hours of use, we recommend that your
muffler be serviced or replaced by an autho-
rized service dealer,
ADDITIONAL SAFETY RULES
FOR OPTIONAL ATTACHMENTS
AO&WARNING: For each optional at-
tachment used, read entire instruction manu-
al before use and follow aft warnings and in-
structions in manual and on attachment,
A_,WARNING: Ensure handlebar is
instafled when using edger or brushcutter at-
tachments, Attach handlebar above arrow on
safety label on the upper shaft (engine end of
unit). If your edger or brushcutter attachment
does not include a handlebar, a handlebar ac-
cessory kit (#530071451) is available from
your authorized service dealer.
5
To Next Page
Loading...
Need help?
General
