3
IDENTIFICATION OF SAFETY SYMBOLS
Symbol Name Designation/Explanation
V Volts Voltage
A Amperes Current
Hz Hertz Frequency (cycles per second)
W Watts Power
min Minutes Time
Direct Current Type or a characteristic of current
Safety Alert Precautions that involve your safety
Read The Operator’s Manual
To reduce the risk of injury, user must read and
understand instruction manual before using this
product.
Keep Bystanders Away Keep all bystanders at least 50’ (15 m) away.
Ricochet
Thrown objects can ricochet and result in
personal injury or property damage.
Sharp Blade
Danger – keep hands and feet away from
blade.
Wear Eye Protection
Wear eye protection with side shields that
are marked to comply with ANSI Z87.1 when
operating this equipment.
Ear protection
Wear ear protection when operating this
equipment.
Wet Conditions Alert Do not expose to rain or use in damp locations.
Gloves Wear non-slip, heavy duty gloves.
Some of the following symbols may be used on this product. Please study them and learn their
meaning. Proper interpretation of these symbols will allow you to operate the product better and
safer.
To Next Page
Loading...
