●
As the handle reaches the “in use” position
the mechanism will “click” and lock into
place. Once locked in, lower the upper bag
stay into position. Now fit the zero tip wheel
by placing the wheel housing on the rear
tube and pulling the plunger, allow the plunger
to click into place.
●
Screw the antenna into the screw terminal on the handle.
●
Using the carry strap, carefully place a fully charged battery into the
RoboKaddy battery tray with the lead connector facing the right hand
side of the trolley.
TIP: Place the rear of the battery into the tray first, then tip forwards
Parts Identification
Antenna
Rotary Speed
Control Knob
Wheel
Spring Clip
Battery
Connection
Lead
Base Controller
under battery tray
Front Wheel
Assembly
Lower
Bag Stay
Handle LED Indicator
On / Off
Rocker Switch
Upper Bag Stay
2
To Next Page
Loading...
Need help?
General
