Power Craft 1050W User Manual

UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
12 Model Number: PKB-1050/2
Mounting accessories
Mounting and removing the auxiliary grip
Fig. C
Mounting
• Loosentheauxiliarygrip(9).
• Slidetheauxiliarygrip(9)overthechuck(7).
• Turntheauxiliarygrip(9)totherequiredposition.
• Tightentheauxiliarygrip(9).
Removing
• Loosentheauxiliarygrip(9).
• Removetheauxiliarygrip(9)fromthechuck(7).
• Tightentheauxiliarygrip(9).
Mounting and removing the depth stop
The depth stop is used to set the maximum drilling depth.
Mounting
• Loosentheauxiliarygrip(9).
• Insertthedepthstop(10)throughtheholeintheauxiliarygrip(9).
• Setthedepthstop(10)totherequiredposition.
• Tightentheauxiliarygrip(9).
Removing
• Loosentheauxiliarygrip(9).
• Removethedepthstop(10)fromtheauxiliarygrip(9).
• Tightentheauxiliarygrip(9).
7
9
10
9

Power Craft 1050W Specifications

General

Brand	Power Craft
Model	1050W
Category	Drill
Language	English