UK Helpline 0905-1460005 • Ireland Helpline 1520-932626
Web Support: www.servotool.eu
Model Number: PKB-1050/2 19
WARRANTY CERTIFICATE
Year of manufacture: 12/2010 HAMMER DRILL PKB-1020/2
Congratulations! You have made an excellent choice with the purchase of this Quality
product. Our commitment to quality also includes our service. Should you, contrary
to expectations, experience defects due to material or manufacturing faults during
private use within 36 months of the date of purchase we shall be liable for warranty in
accordance with statutory warranty regulations, provided that: - The device was not put to any use other
than the intended.- Was not overloaded. - Was not used with the wrong accessories. - Repairs where not
carried out by any other than the authorised workshop. The warranty certificate is only valid in connection
with the receipt. Please keep both in a safe place. The warranty does not affect your statutory rights.
The product is guaranteed for a period of three years beginning on the day of purchase. Keep your purchase
receipt safe as proof of the date of purchase. The guarantee period can only be extended for the duration
of any repair required.
During the warranty period, defective devices can be sent FREIGHT PREPAID to the service address stated at
the end of this booklet. We will, at our discretion either repair or exchange the device in accordance with
warranty legislation.
Please include the following when sending in your product for repair:
1. The receipt (proof of purchase)
2. This warranty certificate with your name, address, contact details and a fault description
completed overleaf.
If the original receipt is not enclosed the repair will be charged for in all cases. After the warranty has
expired you can still send defective devices for repairs FREIGHT PREPAID to the address at the end of this
booklet. Quotes as well as repairs after warranty period are to be paid for in all cases. Ensure the product
is sent well packed as no responsibility can be accepted for items lost or damaged in transit. This warranty
does not affect your statutory rights.
EC DECLARATION OF CONFORMITY
We Ferm B.V.
Lingenstraat 6, 8028 PM Zwolle, The Netherlands
declare that the design and construction of the following machine, in the form supplied by us, comply with
the requirements of the appropriate EC directives.
Product Description:
HAMMER DRILL
Model:
PKB-1020/2
Appropriate EC directives:
2006/42/EC, 2006/95/EC, 2004/108/EC, 2002/95/EC, 2002/96/EC
Applicable harmonised norms:
EN60745-1, EN60745-2-1, EN55014-1, EN55014-2, EN61000-3-2, EN61000-3-3.
J.A. Bakker - van Ingen
CEO Ferm B.V. 12/2010
Warranty
To Next Page
Loading...
Need help?
General
