Need help?Do you have a question about the Power Craft 48455 and is the answer not in the manual?
General| Brand | Power Craft |
|---|---|
| Model | 48455 |
| Category | Saw |
| Language | English |
Read these instructions and safety advice before using the combination saw.
Identification of all parts of the combination saw with numbered references.
Details on voltage, power, speed, blade diameter, and cutting capacities.
Crucial safety guidelines covering blade use, material, and operation.
Step-by-step instructions for unfolding and stabilizing the saw's legs.
Instructions for converting the saw from mitre to circular saw operation.
Instructions for converting the saw from circular saw to mitre operation.
Instructions for operating the saw in circular saw configuration.
Instructions for operating the saw in cross-cut/mitre configuration.
Adjusting the saw blade angle for mitre cuts.
Adjusting the angle of the cut using the mitre setter.
Securing workpieces and performing cuts with the saw head.
Adjusting the cutting depth of the saw blade.
Performing cuts parallel and perpendicular to the grain.
Making angled cuts using the mitre setter.
Procedure for cutting grooves or slots in material.
Adjusting the blade depth for specific cutting requirements.
Step-by-step guide for safely changing the saw blade.
Understanding and resetting the saw's overload cut-out feature.
Procedures for cleaning, lubricating, and maintaining the saw.
Contact details for customer service, parts, and inquiries.
Statement confirming the product meets EU standards and directives.
Details on environmental practices, materials, and waste disposal.
Information on product origin, manufacturer, and EU importer.
To Next Page
