To Next PageTo Next Page
Need help?Do you have a question about the Power Craft PTS 15/250 and is the answer not in the manual?
General| Blade Diameter | 250 mm |
|---|---|
| Power | 1500 W |
| Type | Table Saw |
| Rip Fence | Yes |
| Miter Gauge | Yes |
| Blade Tilt | 0 - 45 ° |
| Dust Extraction Port | Yes |
Key instructions to familiarize yourself with the machine's use and safety precautions.
Essential precautions to reduce risks of electric shock, injury, and fire during operation.
Illustrated diagram showing the parts and their numbering for assembly.
List of components included with the table saw package.
Step-by-step instructions for assembling the saw's base frame and stand.
Guide for attaching table extensions to increase the work surface area.
Instructions for safely installing and removing the protective saw blade guard.
Procedures for adjusting the splitter for different cutting operations and safety.
Steps to adjust the splitter for achieving maximum cutting depth.
Method to set the splitter for specific types of concealed or groove cuts.
Instructions on how to replace a worn or damaged table insert for optimal use.
Detailed steps for safely installing or removing the saw blade.
Pre-operation checks and setup requirements for safe and correct machine use.
Defines the intended applications and limitations of the table saw.
How to operate the saw, including power switch and cutting depth adjustments.
Guide on using the parallel stop for accurate longitudinal cuts.
Instructions for using the cross stop for angled or cross cuts.
How to adjust the saw blade angle for bevel cuts.
Step-by-step process for performing longitudinal (slitting) cuts on wood.
Safety and technique for cutting narrow workpieces, including push stick use.
Specific guidance for cutting very narrow workpieces safely.
How to perform cuts at an angle using the parallel stop.
Procedures for making cross cuts using the cross stop guide.
Information required when ordering spare parts for the machine.
Specifications and technical details of the table saw.
Data on sound pressure and power levels emitted by the machine.
Guidelines for environmentally responsible disposal of the product and accessories.
