Power Ethernet PE 200AV T1000 User Manual

Scker B goes here
These instrucons should be read and understood fully before
installaon and should be kept for future reference.
Model Number: PE 200AV T1000 (referred to as the PE Socket)
WHAT’S IN THE BOX
PE Socket with snap-on white front fascia, 2 screws (clipped to the
back), plasc fascia removal tool, Power Ethernet Quick Installaon
Instrucons and Power Ethernet Quick Setup Guide (this guide).
Please ensure that the instrucons and safety informaon provided in
the Power Ethernet Quick Installaon Instrucons have been followed.
Once the PE Sockets are installed, seng up the network is very easy.
SETTING UP A NETWORK FOR THE FIRST TIME:
The PE Sockets are designed to automacally connect together to form
a single meshed network secured with 128bit AES encrypon.
Each PE Socket comes with 4 Ethernet ports and once installed, all the
Ethernet ports on each PE Socket will automacally linked together.
1. Connect a laptop, PC, printer, VoIP handset or game console using a
CAT5 cable to any Ethernet port on one of the PE Sockets.
2. Connect the other Ethernet devices to the other PE Sockets using
CAT5 cables.
3. To share Internet access among all these devices, simply connect the
Internet router to any one of the PE Sockets using a CAT5 cable.
That simple! Now enjoy a fast secure network with Internet
connecvity everywhere a PE Socket has been installed.
1
2
NEED MORE HELP?
All documentaon, soware and FAQs can be found online at
hp://help.powerethernet.com
3
EXPANDING THE POWER ETHERNET NETWORK.
To expand the network, install as many PE Sockets as needed (up to 64
sockets on a single phase) and they will automacally connect together
as soon as they are powered on.
In more complex installaons, including mulple electrical phases, and
for troubleshoong ps and the Windows management soware,
please consult the PE User Manual which can be downloaded from
hp://help.powerethernet.com
PRODUCT INFORMATION
Thank you for purchasing your PE Sockets. Please register your new
PE Sockets at hp://help.powerethernet.com and join the mailing list
to stay up to date with Power Ethernet’s latest developments.
NOTE: Two or more PE Sockets are required in order to create a
Powerline network. The PE Sockets must be electrically connected
sharing the same power phase in order for PE Sockets to provide a
network connecon between them.
NOTE: Whenever there is an acve Ethernet connecon, the Network
Acvity light on that PE Socket will light up, the PE Socket will wake up
(power light goes green) and it will connect with other PE Sockets.
STEP 2: Quick Setup Guide
The scker below shows the Serial Number and Device Password for this
PE Socket (a spare scker is included in the envelope). It is
recommended to record the installaon locaon of the socket and keep
this informaon safe as it is used by the oponal Windows management
soware and the Serial Number may be required when requesng
technical support.
LIGHTS STATE DESCRIPTION
Power
Solid green.
Red.
Flashing.
Dimmed red.
O.
Power is on.
Sleep mode.
Unit is in pairing mode.
Forced hibernaon.
No power.
PLC
Connecon
O.
Solid.
(Solid colour
denotes
connecon
speed.)
No Powerline network acvity
PLC network connecon (paired).
Green: Powerline network is
detected with high transfer
speed (suitable for HD video
streaming).
Orange: Powerline network is
detected with medium
transfer speed (suitable for
SD video streaming).
Red: Powerline network is
detected with low transfer
speed.
Network
Acvity
O.
Blink.
Solid green.
Unit is sleep mode or no acve
Ethernet connecon.
Network acvity.
Network connecon is detected.
BUTTON PRESSES DESCRIPTION
Reset
Press for 3
seconds.
Press for 7+ secs.
Reset / Wakes up the PE Socket.
This restarts the 15 minute mer.
Forced hibernaon mode.
Join/Leave
Press for 0.5 to 3
seconds.
Press for 10+
seconds.
Iniate pairing mode for next 2
minutes. Power light will ash.
Unit leaves the current Powerline
network and generates a random
Network Password.
R

Power Ethernet PE 200AV T1000 Specifications

General

Brand	Power Ethernet
Model	PE 200AV T1000
Category	Switch
Language	English